Model: R35
Frequency: 125Khz/13.56Mhz
Interface: Wiegand/USB/RS232/TCP-IP/RS485
Support cards: EM card or Mifare card
Introduction: The QR code + RFID card reader is a new generation of smart card reader developed by our company. The appearance of the product adopts the standard 86-box industry standard. It has fast scanning speed, high recognition rate, and strong compatibility. It can be connected to any Wiegand input Controller, suitable for various application scenarios. At present, it is widely used in business office building visitor entry management, scenic tourist staff management, community visitor entry and exit management, administrative hall access control management, supporting gates, access control, visitor machines, smart homes, etc.; it is a perfect upgrade for the traditional credit card system of various industries.
- Parameters
- Pictures
- Downloads
| project | parameter |
| Card reader type | EM card or Mifare card |
| Barcode type | QR, 1D,2D code |
| communication method | Wiegand/USB/RS232/TCP-IP/RS485 |
| Reading direction (bar code) | Angle 45° with the lens as the center point |
| Decoding mode | CMOS |
| Scan code characteristics | Automatic induction, buzzer prompt |
| Operating Voltage | 8-12V |
| Working current | 800mA |
| Reading distance(card) | 3~6CM |
| Reading distance(QR code) | 0-20cm |
| Working humidity | 10%~90% |
| Reading speed | ＜200ms |
| Operating temperature | -20℃~70℃ |
| Material quality | PC and tempered glass (scan code window) |
| Size | 86mm×86mm×42mm |
| Weight | 150G |
| operating system | Windows XP/7/8/10, Linux |
| Indicator light | Red work light, green feedback light, emerald green network light |
| Remarks | Restore factory settings: Use a sharp object to insert into the Reset hole on the back of the QR code reader, and automatically restart and release the card reader. |
